What To Do If Your Water Heater Unexpectedly Stops Working

Instant Quote

 

 

How do you really feel in regards to What Would Cause My Electric Water Heater to Stop Working??


What Would Cause My Electric Water Heater to Stop Working?
Lots of modern residences utilize an electrical water heater for their furnace, because of its ease as well as ease of use. Nevertheless, just like any other electric appliances, issues may develop with its usage, suddenly. It can be really discouraging to wake up to a chilly shower instead of a hot one or having your bathroom with water that isn't hot adequate or even also hot. Whatever the situation might be, water heater troubles can be quite stressful. Fortunately, we've made a listing of feasible services to your hot water heater problems. There are a number of variables that could create a lot of these troubles, it could be a problem with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you turn off the primary power supply for security. Whatever the trouble is, getting it fixed must not present too much of an issue if you comply with these actions:

 

Call A Professional:


If after replacing all defective components and resetting your temperature, the water heater still isn't functioning, you might need to get in touch with a professional plumber for a specialist point of view. The problem with your heating unit could be that the hot and cold faucets have actually been switched or it may be undersized for the amount of hot water needed in your home. Whatever the case may be, an expert plumber would help resolve the problem.

 

Check Your Power Supply:


As fundamental as this may seem, it is really necessary. Without adequate power, your water heater will not function. So the first thing to do when your water suddenly retires is to validate that it isn't a power trouble. Examine if the fuse is burnt out or the breaker stumbled. If the breaker is the problem, simply turn it on and off once more. Change any kind of busted or damaged fuse. Check the home appliance with power after these modifications to see if it's now working.

 

Examine Your Thermostat:


If your hot water heater still isn't functioning or the water coming out isn't hot sufficient, you may need to examine the temperature level settings on your upper thermostat. Make certain the circuit breaker is switched off prior to doing anything. Open up the access panel and press the red button for temperature level reset over the thermostat. This must assist heat the water. Turn the breaker back on as well as inspect if the problem has been settled.

 

Examine the Burner in the Water Heater:


If it's not a power problem, after that attempt taking a look at your heating element if it is still working. Examine each of your burner to make sure the problem isn't with any one of them. If any one of them is defective, replace that component and after that check whether the warm water is back on.

 

Final thought


Water heater troubles are not constantly major. Many of them result from minor issues like a blown fuse or damaged heating element. Replacing the damaged parts ought to do the trick. However, if you are still incapable to fix the issue, give a call to your nearest plumber ahead to get it dealt with.

 

8 possible reasons why you have no Hot Water

 

Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.

 

Water Leak

 

Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.


Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.

 

Gas Heater: Gas Leak

 

If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.

 

Gas Heater: Pilot Light Problems

 

There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.


Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.

 

Gas Heater: Faulty Thermocouple

 

The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.

 

Electric Heater: Breaker Blues

 

Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.

 

Electric Heater: Reaching The Limit

 

If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.

 

Electric Heater: Heating Element

 

If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


No Hot Water — Water Heater Repair

 

We had been made aware of that editorial on How to Troubleshoot and Repair an Electric Water Heater through an acquaintance on a different blog. Sharing is good. Who knows, you might be helping someone out. Thanks a bunch for your time. Please pay a visit to our site back soon.




Book An Appointment
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “What To Do If Your Water Heater Unexpectedly Stops Working”

Leave a Reply

Gravatar